Can you fix a leaking gutter joint without replacing the whole run?

Usually yes. Seals and union brackets can be replaced individually, provided the surrounding guttering is still sound and the fall is correct.

How quickly can a repair be booked?

Most work is scheduled within a few days, and cleans are usually next day. If a leak is running into the property, say so and it will be prioritised.

Do you repair cast iron guttering?

Yes. Cast iron is handled differently to uPVC; it is heavier, more brittle at the joints and needs careful support while working. If a section has rusted through the base, replacement of that length is the honest answer.

Will the repair match my existing guttering?

Repairs are made in the matching profile, and the closest available colour where an exact match is discontinued. You are told before the work what the finish will look like.

How long should a gutter repair last?

A properly diagnosed repair, correct fall, sound brackets, new seals, should give you years of normal service. Repairs fail early when the underlying cause was never addressed, which is what the diagnosis step is for.

Do you offer emergency gutter repairs?

Urgent leaks are prioritised where the diary allows, and most gutter work is booked within a day or two rather than weeks.

Is the repair guaranteed?

Yes: there is a satisfaction guarantee on the work, and the repair is water tested before we leave the property.

Are you insured for work at height?

Yes: £5 million public liability cover, plus a satisfaction guarantee on the work carried out.

Card, cash or bank transfer (BACS), settled once the work is finished and you have seen the photos.

Do you cover my area?

Bury, Bolton, Whitefield, Ramsbottom, Worsley, Harwood, Bromley Cross, Prestwich and Tottington, plus nearby postcodes across Greater Manchester. Send your postcode and you will get a straight answer.

Services / Gutter repairs

Gutter Repairs in BuryFixed by a Roofer

Leaks, splits, failed joints and sagging runs diagnosed and repaired by a roofer, not sealed over and left to fail again next winter.

Get a Free Quote 07837 187937

Free quote, no call-out charge · £5m public liability · Satisfaction guarantee

15 years

in the roofing trade

£5m

public liability cover

Next day

for most gutter cleans

From £59

gutter cleaning

Gutter repairs explained

Gutter repair is the targeted fixing of a system that is sound overall but failing in places: a joint that drips, a split section, a bracket that has let go, an outlet that has cracked around the downpipe. The aim is to get the whole run carrying water properly again without replacing guttering that has years of life left in it.

The difference between a repair that holds and one that fails again is the diagnosis. Water shows itself at the lowest point, not the point where it escaped, so a dripping joint is often the result of a dropped bracket two metres away holding standing water against the seal. Fifteen years in the roofing trade is what allows the cause to be found rather than the symptom taped over.

Repairs are carried out on one to three-storey properties across Bury, Bolton and the surrounding towns, in uPVC, deep-flow, ogee, aluminium and cast iron. Where a section really is beyond repair, you are told plainly and quoted for a partial replacement run instead, not sold a repair that will not last.

Who it is for

Anyone with a joint that drips onto a path, doorstep or conservatory roof
Properties with a green stripe or damp patch down the brickwork under one spot
Runs that have visibly dropped, sagged or pulled away from the fascia
Guttering damaged by wind, ladders, scaffolding or a fallen branch
Homeowners quoted for full replacement who suspect a repair would do
Landlords needing a defect fixed and evidenced quickly

What's included

Leaking and dripping joints resealed or replaced
Split and cracked sections swapped out
Sagging runs re-secured and set back to the correct fall
Free quote from photos and your postcode, or a site visit

What happens if it is left

A single dripping joint is around a litre of water landing on the same square of wall every few minutes of rainfall. Over a winter that is enough to saturate pointing, blow render and leave the inside face of the wall permanently cold and damp. The repair is small; the consequence is not.

Left alone, a failed joint gets worse mechanically as well. Water sitting in the run freezes, expands and opens the split further, and the extra weight pulls the next bracket loose. What began as one seal becomes a sagging span that no longer drains, and then a full replacement rather than a fifteen-minute fix.

Where the leak sits above a doorway, path or drive it also becomes a slip and staining problem; icy steps in winter, algae on the flags, a stained porch canopy. None of that stops until the water is going where it should.

Common mistakes

Wrapping a joint in tape or silicone from below, which traps water behind it
Sealing the leak without correcting the fall that caused the standing water
Mixing profiles, fitting a square-line joint to a half-round run and hoping
Refixing a bracket into rotten fascia timber that will not hold it
Replacing one visibly split length and ignoring the identical brittle sections either side
Assuming full replacement is the only option because that is what was quoted

How the WorkIs Carried Out

Step 1

Free quote, no call-out charge

Send photos of the guttering with your address or postcode, or ask for a site visit. You get a fixed price before anything is booked, and there is no charge for the quote either way.

Step 2

Diagnosis of the actual cause

The run is inspected at height and, where useful, water-tested so the source of the leak is confirmed rather than assumed. Fall, brackets, joints, outlets and the fascia behind are all checked.

Step 3

The repair carried out

Seals replaced, split sections swapped for matching profile, brackets refixed or renewed, and the fall reset towards the outlet so the section drains instead of holding water.

Step 4

Water tested before we leave

The repaired section is run with water and watched at the joint and the downpipe. If it drips, it is not finished.

Step 5

Photos, tidy up, guarantee

Before-and-after photographs are sent to you as proof of the work, the ground is swept up, and the job is backed by a satisfaction guarantee. Card, cash or bank transfer.

What you get out of it

Fixed at the cause

The fall, brackets and joints are dealt with together, so the same joint is not leaking again by next winter.

Repair before replacement

If a repair will hold, that is what you are quoted for. Replacement is recommended only where the guttering is genuinely beyond it.

Water tested on the day

The repair is proved with running water while the ladder is still up, not signed off on appearance.

Protects the brickwork

Stopping the drip stops the saturation, which is what keeps pointing, render and internal walls dry.

Fully insured

£5 million public liability cover for work at height on your property.

Photo record

Before-and-after photographs of the repaired section, useful for your own records or a landlord's.

Gutter repairs in detail

What actually fails, and why

Rubber seals in uPVC union brackets harden and shrink with UV and temperature cycling, so they weep first at the joints nearest the sunniest elevation. Clip-in joints on older runs lose their grip and open under the weight of standing water.

Brackets fail either at the fixing, screws pulling out of soft or rotten fascia, or in the bracket itself, where UV has made the plastic brittle. Cast iron fails differently again: it rusts from the inside out and cracks at the bolted joints, and the putty in those joints dries and falls away.

Profiles and matching existing runs

Half-round, square-line, deep-flow and ogee are not interchangeable. Repairs are made in the matching profile so the joint seals properly and the run looks like one system rather than a patchwork.

Where an exact colour or profile is no longer produced, the practical options are explained up front: closest available match, or replacing a full run from corner to downpipe so the elevation stays consistent.

When repair stops being the right answer

If a uPVC run has gone brittle and chalky throughout, new brackets and seals will simply move the failure a metre along. The same is true of cast iron that has rusted through the base of the channel rather than at a joint.

In those cases a partial or full replacement run is the cheaper outcome over five years, and that is said plainly with photographs to back it up. Repairs are also not the answer where the fascia behind has rotted; that timber has to be sound before anything is fixed back to it.

Repairs alongside a clean

Most repairs are found during a gutter clean, because that is when the run is emptied and can actually be assessed. Where possible the repair is quoted and carried out on the same visit so there is only one set-up.

Where parts are needed, the price is confirmed before ordering and a return date is agreed. Nothing is fitted or charged without your say-so.

Gutter repairs across Bury, Bolton and Greater Manchester

Based in Bury, Greater Manchester and covering the surrounding towns. If your postcode is not listed, it is often still covered, see the areas covered page, or the homepage for an overview of the whole service.

Gutter repairs:Your Questions Answered

It depends on what has failed and how high it is, a single joint is a small job, a sagging span with rotten fascia behind it is not. Quotes are free with no call-out charge, from photos and your postcode or from a site visit.